H800AJ
H800AJ
H800AJ
H800AJ

JLG Equipment H800AJ

Boom Lifts


How can we help?

888-503-4685

Key Specs

  • Platform Height: 80 ft / 24.38 m
  • Machine Width: 8 ft 2 in. / 2.49 m

Key Features

  • Same 800AJ with Efficient Hybrid Power - Core components like the drivetrain, weldments and hydraulics are the same, helping to improve total cost of ownership with common parts, service and reduced training needs
  • Built on 20 Years of Experience - JLG is expanding the hybrid family as we celebrate two decades of experience in this product category
  • Economical Performance - Provides diesel performance with better fuel economy

Key Specs

  • Platform Height: 80 ft / 24.38 m
  • Machine Width: 8 ft 2 in. / 2.49 m

Key Features

  • Same 800AJ with Efficient Hybrid Power - Core components like the drivetrain, weldments and hydraulics are the same, helping to improve total cost of ownership with common parts, service and reduced training needs
  • Built on 20 Years of Experience - JLG is expanding the hybrid family as we celebrate two decades of experience in this product category
  • Economical Performance - Provides diesel performance with better fuel economy

Features

  • Economical Performance - Provides diesel performance with better fuel economy

  • Same 800AJ with Efficient Hybrid Power - Core components like the drivetrain, weldments and hydraulics are the same, helping to improve total cost of ownership with common parts, service and reduced training needs

  • Built on 20 Years of Experience - JLG is expanding the hybrid family as we celebrate two decades of experience in this product category

Specifications

Axle Oscillation:
8 in. / 0.2 m
Batteries:
12V 235Ah 4D Maintinance free AGM
Capacity - Fuel Tank:
25 gal. / 94.64 L
Capacity - Hydraulic Reservoir:
21 gal. / 79.49 L
Drive Speed - Platform Elevated:
0.3 mph / 0.43 km/h
Drive Speed - Platform Lowered:
3.5 mph / 5.55 km/h
Electrical System:
84 Volts DC
Engine Type - Diesel:
Kubota Tier 4 Final
Gradeability - 4WD:
45 %
Ground Clearance:
11 in. / 0.28 m
Horizontal Outreach:
51 ft 10 in. / 15.8 m
Jib - Range of articulation:
130 Degrees
Machine Height:
9 ft 10 in. / 3 m
Machine Length:
36 ft 6 in. / 11.13 m
Machine Weight:
35520 lb / 16111.60 kg
Machine Width:
8 ft 2 in. / 2.49 m
Maximum Ground Bearing Pressure:
76 psi / 5.32 Kg/cm2
Platform Capacity:
500 lb / 226.80 kg
Platform Height:
80 ft / 24.38 m
Swing:
360 Degrees
Tailswing:
3 ft 6 in. / 1.07 m
Tire Size:
15-625 Wide Lug Tread
Turning Radius - Inside:
12 ft 6 in. / 3.81 m
Turning Radius - Outside:
19 ft 8 in. / 5.99 m
Up and Over Height:
32 ft 1 in. / 9.78 m
Wheelbase:
10 ft / 3.05 m
  • Features

    Features

    • Economical Performance - Provides diesel performance with better fuel economy

    • Same 800AJ with Efficient Hybrid Power - Core components like the drivetrain, weldments and hydraulics are the same, helping to improve total cost of ownership with common parts, service and reduced training needs

    • Built on 20 Years of Experience - JLG is expanding the hybrid family as we celebrate two decades of experience in this product category

  • Specifications

    Specifications

    Axle Oscillation:
    		8 in. / 0.2 m
    Batteries:
    		12V 235Ah 4D Maintinance free AGM
    Capacity - Fuel Tank:
    		25 gal. / 94.64 L
    Capacity - Hydraulic Reservoir:
    		21 gal. / 79.49 L
    Drive Speed - Platform Elevated:
    		0.3 mph / 0.43 km/h
    Drive Speed - Platform Lowered:
    		3.5 mph / 5.55 km/h
    Electrical System:
    		84 Volts DC
    Engine Type - Diesel:
    		Kubota Tier 4 Final
    Gradeability - 4WD:
    		45 %
    Ground Clearance:
    		11 in. / 0.28 m
    Horizontal Outreach:
    		51 ft 10 in. / 15.8 m
    Jib - Range of articulation:
    		130 Degrees
    Machine Height:
    		9 ft 10 in. / 3 m
    Machine Length:
    		36 ft 6 in. / 11.13 m
    Machine Weight:
    		35520 lb / 16111.60 kg
    Machine Width:
    		8 ft 2 in. / 2.49 m
    Maximum Ground Bearing Pressure:
    		76 psi / 5.32 Kg/cm2
    Platform Capacity:
    		500 lb / 226.80 kg
    Platform Height:
    		80 ft / 24.38 m
    Swing:
    		360 Degrees
    Tailswing:
    		3 ft 6 in. / 1.07 m
    Tire Size:
    		15-625 Wide Lug Tread
    Turning Radius - Inside:
    		12 ft 6 in. / 3.81 m
    Turning Radius - Outside:
    		19 ft 8 in. / 5.99 m
    Up and Over Height:
    		32 ft 1 in. / 9.78 m
    Wheelbase:
    		10 ft / 3.05 m
  • Downloads & Documentation

    Links

Other Boom Lifts Models

Contact

Contact

By submitting this form, you agree to Leppo's Terms & Conditions, consent to our Privacy Policy, and give your express written consent for Leppo to contact you about our products and services through email, phone, mail, or recurring text messages. You also consent to Leppo, Inc. ("we," "us," or "our") collecting and processing the personal information you provide for the following purposes: (a) To prepare and deliver the requested quote; (b) To follow up regarding your inquiry via email, phone, mail, or recurring automated text message; and (c) To send relevant service or product information through any of the above channels (if applicable).

Text Messaging: By providing your phone number and submitting this form, you expressly consent to receive text messages from Leppo at the number provided. Message frequency may vary. Message and data rates may apply. Consent to receive text messages is not a condition of purchase. Reply STOP to cancel or HELP for assistance at any time.

We will retain your information until you request deletion. We do not sell or share your personal data with third parties except as necessary to fulfill your request or as required by law. For full details, please review our Privacy Policy.

Consignment

By submitting this form, you agree to Leppo's Terms & Conditions, consent to our Privacy Policy, and give your express written consent for Leppo to contact you about our products and services through email, phone, mail, or recurring text messages. You also consent to Leppo, Inc. ("we," "us," or "our") collecting and processing the personal information you provide for the following purposes: (a) To prepare and deliver the requested quote; (b) To follow up regarding your inquiry via email, phone, mail, or recurring automated text message; and (c) To send relevant service or product information through any of the above channels (if applicable).

Text Messaging: By providing your phone number and submitting this form, you expressly consent to receive text messages from Leppo at the number provided. Message frequency may vary. Message and data rates may apply. Consent to receive text messages is not a condition of purchase. Reply STOP to cancel or HELP for assistance at any time.

We will retain your information until you request deletion. We do not sell or share your personal data with third parties except as necessary to fulfill your request or as required by law. For full details, please review our Privacy Policy.

Request a Service

By submitting this form, you agree to Leppo's Terms & Conditions, consent to our Privacy Policy, and give your express written consent for Leppo to contact you about our products and services through email, phone, mail, or recurring text messages. You also consent to Leppo, Inc. ("we," "us," or "our") collecting and processing the personal information you provide for the following purposes: (a) To prepare and deliver the requested quote; (b) To follow up regarding your inquiry via email, phone, mail, or recurring automated text message; and (c) To send relevant service or product information through any of the above channels (if applicable).

Text Messaging: By providing your phone number and submitting this form, you expressly consent to receive text messages from Leppo at the number provided. Message frequency may vary. Message and data rates may apply. Consent to receive text messages is not a condition of purchase. Reply STOP to cancel or HELP for assistance at any time.

We will retain your information until you request deletion. We do not sell or share your personal data with third parties except as necessary to fulfill your request or as required by law. For full details, please review our Privacy Policy.

By submitting this form, you agree to Leppo's Terms & Conditions, consent to our Privacy Policy, and give your express written consent for Leppo to contact you about our products and services through email, phone, mail, or recurring text messages. You also consent to Leppo, Inc. ("we," "us," or "our") collecting and processing the personal information you provide for the following purposes: (a) To prepare and deliver the requested quote; (b) To follow up regarding your inquiry via email, phone, mail, or recurring automated text message; and (c) To send relevant service or product information through any of the above channels (if applicable).

Text Messaging: By providing your phone number and submitting this form, you expressly consent to receive text messages from Leppo at the number provided. Message frequency may vary. Message and data rates may apply. Consent to receive text messages is not a condition of purchase. Reply STOP to cancel or HELP for assistance at any time.

We will retain your information until you request deletion. We do not sell or share your personal data with third parties except as necessary to fulfill your request or as required by law. For full details, please review our Privacy Policy.

×

Leppo Rents Employee Portal

×

Your session will expire in . If you want to reset this timer, please click OK.

Change Your Preferred Location
×

Leppo Rents Employee Portal