Features

• Two-wheel, four-wheel, crab steering standard.

• Remote Boom Control can raise/lower and extend/retract the boom, as well as start/stop the engine from the work platform or outside the cab.

• Choice of Dual-Function or Tri-Function pilot-operated joysticks that allow operators precise movement of heavy loads

• Choice of canopy or cab with heating and defrosting  systems standard (air-conditioning optional).

• Standard pneumatic tires.

• Un-matched panoramic visibility increases work-site safety and operator productivity and reduces operator fatigue.

• Standard centrifugal pre-cleaner and two-stage air cleaner.

• Rifled bushings in key areas

• Lockable, two-piece cab door for security, communication and cross-ventilation.

• ROPS and FOPS certified operator's compartment.

• Transmission and hydraulics easily accessed through large hinged panel.

• Hydraulic main control valve in back door.

• Three steering modes – 4-wheel, 2-wheel and crab – enhance maneuverability and are easily changed by the flip of a switch.

• Rear axle stabilization system locks the rear axle to the frame if the parking brake is engaged, if the boom is raised 60 degrees or higher, or if the PWP System is activated.

• Engine shutdown protection feature allows 30-seconds of run time for moving the unit to a safe location for loading or repair.

• Powershift transmission with four forward and two reverse gears, with a 2-year/2,000-hour warranty.

• Exterior boom hose routings for easy access.

• Industry loading job site maneuverability with a 12' 2" turning radius.

• Easy access to hydraulic oil and transmission reservoirs.

• 10-degree frame tilt in both directions.

• Double universal joints for tight turn radius without applyingstress on the axle.

• Personnel Work Platform System allows the use of ANSI/ITSDF B56.6-compliant personnel work platforms for safety and efficiency.

• Standard lockable storage compartment for service items, such as work gloves, tools, blueprints and more.