Gehl DL7-44 GEN:2

Features

• Hydraulic main control valve in back door.

• Standard centrifugal pre-cleaner and two-stage air cleaner.

• ROPS and FOPS certified operator's compartment.

• Lockable, two-piece cab door for security, communication and cross-ventilation.

• Engine shutdown protection feature allows 30-seconds of run time for moving the unit to a safe location for loading or repair.

• Personnel Work Platform System allows the use of ANSI/ITSDF B56.6-compliant personnel work platforms for safety and efficiency.

• Standard pneumatic tires.

• Industry loading jobsite maneuverability with a 12' 2" turning radius.

• Exterior boom hose routings for easy access.

• Easy access to hydraulic oil and transmission reservoirs.

• Un-matched panoramic visibility increases work-site safety and operator productivity and reduces operator fatigue.

• Choice of Dual-Function or Tri-Function pilot-operated joysticks that allow operators precise movement of heavy loads

• Powershift transmission with four forward and two reverse gears, with a 2-year/2,000-hour warranty.

• 10-degree frame tilt in both directions.

• Double universal joints for tight turn radius without applying stress on the axle.

• Two-wheel, four-wheel, crab steering standard.

• Rear axle stabilization system locks the rear axle to the frameif the parking brake is engaged, if the boom is raised 60 degrees or higher, or if the PWP System is activated.

• Rifled bushings in key areas

• Three steering modes – 4-wheel, 2-wheel and crab – enhance maneuverability and are easily changed by the flip of a switch.

• Standard lockable storage compartment for service items, such as work gloves, tools, blueprints and more.

• Choice of canopy or cab with heating and defrosting  systems standard (air-conditioning optional).

• Remote Boom Control can raise/lower and extend/retract the boom, as well as start/stop the engine from the work platform or outside the cab.

• Transmission and hydraulics easily accessed through large hinged panel.