INTIMIDATOR 15XPC
INTIMIDATOR 15XPC
INTIMIDATOR 15XPC
INTIMIDATOR 15XPC
INTIMIDATOR 15XPC
INTIMIDATOR 15XPC
INTIMIDATOR 15XPC
INTIMIDATOR 15XPC
INTIMIDATOR 15XPC
INTIMIDATOR 15XPC

*Bandit Equipment is available at select Leppo locations.

BANDIT INTIMIDATOR 15XPC — TOWABLE DRUM STYLE HAND-FED CHIPPER

For those seeking a compact-yet powerful 15” capacity drum chipper turn to the Intimidator 15XPC. This impressive chipper features a 24” diameter chipping drum with four knives. Built stronger using the highest quality components and assembled with solid welded construction, the Intimidator 15XPC will outperform and outlast all other 15” capacity drum chippers on the market.

The 15XPC can easily be towed due to it slim design and weighing approximately 6,800 pounds with 145 horsepower gas engine.

The powerful dual feed wheel system consisting of 10 5/8" diameter feed wheels driven via 32.3 CID hydraulic motors achieves high pulling and compressing power making the unit easy to feed. The standard hydraulic lift cylinder gives extra down pressure and allows the top feed wheel to be hydraulically raised to feed larger diameter pieces.

As with all of Bandit Models, a wide array of gas and diesel engine options are offered. The Model 15XPC can be equipped with Kohler or Caterpillar diesel and PSI or Ford gas engine options ranging from 74 to 165 horsepower.

Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.


Features

  • 24" diameter x 18 3/4" wide drum with four knives

  • Single 8,000 pound axle with (2) 215/75R 17.5" tires

  • Bandit control panel with reversing auto feed

  • 74 - 165 horsepower gas and diesel engine options available

  • (2) 32.3 CID hydraulic motors

  • (2) 10 5/8" diameter x 18 3/4" wide feed wheels with bottom clean out door

  • 30 3/4" high x 54" infeed with folding tray

  • Optional solid infeed tray with heavy-duty rim

  • Standard hydraulic lift cylinder

  • 360 degree hand crank discharge chute with end chip deflector (height adjustable)

  • Optional Hydraulic winch

Specifications

Specifications - Capacity:
15 in | 38.10 cm
Specifications - Feed Rate:
120 ft/min
Specifications - Fuel Tank:
25 gal | 94.63 L
Specifications - Height:
98 in | 248.92 cm
Specifications - Hydraulic Tank:
12 gal | 45.42 L
Specifications - Length (Open):
210 in | 533.40 cm
Specifications - Opening:
17.25 in x 18.63 in | 43.82 cm x 47.31 cm
Specifications - Weight:
6800 - 7500 lbs.
Specifications - Width:
81 in | 205.74 cm
  • Features

    Features

    • 24" diameter x 18 3/4" wide drum with four knives

    • Single 8,000 pound axle with (2) 215/75R 17.5" tires

    • Bandit control panel with reversing auto feed

    • 74 - 165 horsepower gas and diesel engine options available

    • (2) 32.3 CID hydraulic motors

    • (2) 10 5/8" diameter x 18 3/4" wide feed wheels with bottom clean out door

    • 30 3/4" high x 54" infeed with folding tray

    • Optional solid infeed tray with heavy-duty rim

    • Standard hydraulic lift cylinder

    • 360 degree hand crank discharge chute with end chip deflector (height adjustable)

    • Optional Hydraulic winch

  • Specifications

    Specifications

    Specifications - Capacity:
    15 in | 38.10 cm
    Specifications - Feed Rate:
    120 ft/min
    Specifications - Fuel Tank:
    25 gal | 94.63 L
    Specifications - Height:
    98 in | 248.92 cm
    Specifications - Hydraulic Tank:
    12 gal | 45.42 L
    Specifications - Length (Open):
    210 in | 533.40 cm
    Specifications - Opening:
    17.25 in x 18.63 in | 43.82 cm x 47.31 cm
    Specifications - Weight:
    6800 - 7500 lbs.
    Specifications - Width:
    81 in | 205.74 cm

Related Inventory For Sale

Contact

Contact

Consignment

Request a Service

×

Leppo Rents Employee Portal

×

Your session will expire in . If you want to reset this timer, please click OK.

Change Your Preferred Location