200UC
200UC
200UC
200UC
200UC
200UC
200UC
200UC

*Bandit Equipment is available at select Leppo locations.

BANDIT 200UC — TOWABLE DISC STYLE HAND-FED CHIPPER

Designed mainly for utility line contractors, the Model 200UC has also become a popular unit for tree services, rentals, municipalities and landscapers looking for a low cost, light weight chipper with the ability to occasionally chip material up to 12" capacity. The 200UC is currently the most popular 12" capacity disc-style chipper offered due to its weight, capacity and price.

The powerful dual feed wheel system is driven via (2) 15.9 CID hydraulic motors providing approximately 3376 lbs. of pulling power. The optional hydraulic lift cylinder is recommended for additional pulling and compressing power making the unit easier to feed and more productive.

Choose from gas or diesel engine options ranging from 67 to 84 horsepower. A standard 45" inch wide infeed provides ample room for chipping brushy material. No hydraulic winch option is available for this model. If you are looking for a winch or are looking for a disc-style chipper with greater pulling power we recommend looking at the Model 250XP as it features a more powerful feed system, larger engine options and an optional winch.

Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.


Features

  • 29" high x 35" wide infeed with fold down tray

  • Optional hydraulic lift cylinder

  • 360 degree manual discharge chute with end chip deflector

  • Bandit control panel with reversing auto feed

  • (2) 7 1/2" diameter x 16 3/8" wide feed wheels with bottom clean out door

  • 40" diameter x 1 1/4" thick with four knives

  • (2) 15.9 CID hydraulic motors

  • Single 6,000 pound axle with 225/75R 15" tires

  • 67 to 89 horsepower gas and diesel engine options

Specifications

Specifications - Capacity:
12 in | 30.48 cm
Specifications - Feed Rate:
120 ft/min | 36.60 m/min
Specifications - Fuel Tank:
24.50 gal | 92.80 L
Specifications - Height:
94 in | 244 cm
Specifications - Hydraulic Tank:
12 gal | 45.40 L
Specifications - Length (Open):
198 in | 502.90 cm
Specifications - Opening:
14 in x 17 in | 35.60 cm x 43 cm
Specifications - Weight:
4,800 lbs | 2,177.24 kg
Specifications - Width:
68.50 in | 182.90 cm
  • Features

    Features

    • 29" high x 35" wide infeed with fold down tray

    • Optional hydraulic lift cylinder

    • 360 degree manual discharge chute with end chip deflector

    • Bandit control panel with reversing auto feed

    • (2) 7 1/2" diameter x 16 3/8" wide feed wheels with bottom clean out door

    • 40" diameter x 1 1/4" thick with four knives

    • (2) 15.9 CID hydraulic motors

    • Single 6,000 pound axle with 225/75R 15" tires

    • 67 to 89 horsepower gas and diesel engine options

  • Specifications

    Specifications

    Specifications - Capacity:
    12 in | 30.48 cm
    Specifications - Feed Rate:
    120 ft/min | 36.60 m/min
    Specifications - Fuel Tank:
    24.50 gal | 92.80 L
    Specifications - Height:
    94 in | 244 cm
    Specifications - Hydraulic Tank:
    12 gal | 45.40 L
    Specifications - Length (Open):
    198 in | 502.90 cm
    Specifications - Opening:
    14 in x 17 in | 35.60 cm x 43 cm
    Specifications - Weight:
    4,800 lbs | 2,177.24 kg
    Specifications - Width:
    68.50 in | 182.90 cm

Related Inventory For Sale

Contact

Contact

Consignment

Request a Service

×

Leppo Rents Employee Portal

×

Your session will expire in . If you want to reset this timer, please click OK.

Change Your Preferred Location


×

Leppo Rents Employee Portal