75XP
75XP
75XP
75XP
75XP
75XP
75XP
75XP
75XP
75XP

*Bandit Equipment is available at select Leppo locations.

BANDIT 75XP — TOWABLE DISC STYLE HAND-FED CHIPPER

The Bandit Model 75XP features the same features and options as the popular Model 65XP but has a feed wheel that pivots in the opposite direction which allows the feed wheel to be in close proximity to the chipper disc reducing the chances for smaller pieces to wedge or bind the feed system. The throat opening is 7" high x12" wide and compared to most competitors in this size range the width is nearly double making this unit one of the more production machines in this size range.

Choose from Kohler 25 or 37 or Briggs 35 horsepower gas engines options. A single 2200 pound axle is standard and a 3500 pound axle with 14" tires can be ordered as an option giving the unit a more rugged look.

The feed system consists of a single pivoting top feed wheel driven via a 24.95 CID hydraulic motor. Down pressure springs are featured on each side of the feed wheel providing over 550 pounds of down pressure allowing the 75XP to easily pull and compress material into the chipper. A wide profile infeed hopper further enhances the machines ability to process limby material and small trees.

Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.


Features

  • 29" high x 42" wide infeed with folding tray

  • Optional dual feed wheels

  • 360 degree manual discharge chute with end chip deflector

  • (1) pivoting single feed wheel 10 5/8" diameter x 11 1/2" wide

  • Single 2,200 pound axle with (2) 20.5 x 8 x 10 tires

  • Optional auto feed

  • 26" diameter x 3/4 thick chipper disc with two knives

  • 25 to 37 HP Kohler or Briggs 35 HP gas engine options

Specifications

Specifications - Capacity:
7 in | 17.78 cm
Specifications - Feed Rate:
80 ft/min | 24.40 m/min
Specifications - Fuel Tank:
7 gal | 26.50 L
Specifications - Height:
90 in | 228.60 cm
Specifications - Hydraulic Tank:
7 gal | 26.50 L
Specifications - Length (Open):
156 in | 396.24 cm
Specifications - Opening:
7 in x 12 in | 17.80 cm x 30.50 cm
Specifications - Weight:
2,100 lbs | 952.54 kg
Specifications - Width:
67 in | 170 cm
  • Features

    Features

    • 29" high x 42" wide infeed with folding tray

    • Optional dual feed wheels

    • 360 degree manual discharge chute with end chip deflector

    • (1) pivoting single feed wheel 10 5/8" diameter x 11 1/2" wide

    • Single 2,200 pound axle with (2) 20.5 x 8 x 10 tires

    • Optional auto feed

    • 26" diameter x 3/4 thick chipper disc with two knives

    • 25 to 37 HP Kohler or Briggs 35 HP gas engine options

  • Specifications

    Specifications

    Specifications - Capacity:
    7 in | 17.78 cm
    Specifications - Feed Rate:
    80 ft/min | 24.40 m/min
    Specifications - Fuel Tank:
    7 gal | 26.50 L
    Specifications - Height:
    90 in | 228.60 cm
    Specifications - Hydraulic Tank:
    7 gal | 26.50 L
    Specifications - Length (Open):
    156 in | 396.24 cm
    Specifications - Opening:
    7 in x 12 in | 17.80 cm x 30.50 cm
    Specifications - Weight:
    2,100 lbs | 952.54 kg
    Specifications - Width:
    67 in | 170 cm

Contact

Contact

Consignment

Request a Service

×

Leppo Rents Employee Portal

×

Your session will expire in . If you want to reset this timer, please click OK.

Change Your Preferred Location