65XP
65XP
65XP
65XP
65XP
65XP
65XP
65XP

*Bandit Equipment is available at select Leppo locations.

BANDIT 65XP — TOWABLE DISC STYLE HAND-FED CHIPPER

The Bandit Model 65XP is an entry level disc-style chipper capable of chipping material up to 6" in diameter. A great all around unit for rental and landscape companies looking for an economical easy to tow unit. Weighing approximately 2,000 pounds this machine can easily be maneuvered in tight areas. Kohler or Briggs gas engine options are available ranging from 25 to 37 horsepower.

The feed system consists of a single pivoting top feed wheel driven via a 24.95 CID hydraulic motor. Down pressure springs are featured on each side of the feed wheel providing over 550 pounds of down pressure allowing the 65XP to easily pull and compress material into the chipper. A wide profile infeed hopper further enhances the machines ability to process limby material and small trees.

The 65XP rides on a 2,200 pound axle, an optional 3,500 pound axle with 14" tires is also available. The optional auto feed is recommended to regulate the feed system in lieu of having to stay by the machine and use the control bar.

Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.


Features

  • 360 degree manual discharge chute with end chip deflector

  • Optional auto feed

  • Single 2,200 pound axle with (2) 20.5 x 8 x 10 tires

  • 26" diameter x 3/4 thick chipper disc with two knives

  • 25 or 37 HP Kohler or Briggs 35 HP gas engine options

  • (1) pivoting single feed wheel 10 5/8" diameter x 11 1/2" wide

  • Optional dual feed wheels

  • 29" high x 42" wide infeed with folding tray

Specifications

Specifications - Capacity:
6 in | 15.24 cm
Specifications - Feed Rate:
80 ft/min | 24.38 m/min
Specifications - Fuel Tank:
7 gal | 26.49 L
Specifications - Height:
90 in | 228.60 cm
Specifications - Hydraulic Tank:
7 gal | 26.49 L
Specifications - Length (Open):
156 in | 386.08 cm
Specifications - Opening:
6 in x 12 | 15.24 cm x 30.48 cm
Specifications - Weight:
2,000 lbs | 907.19 kg
Specifications - Width:
67 in | 170.18 cm
  • Features

    Features

    • 360 degree manual discharge chute with end chip deflector

    • Optional auto feed

    • Single 2,200 pound axle with (2) 20.5 x 8 x 10 tires

    • 26" diameter x 3/4 thick chipper disc with two knives

    • 25 or 37 HP Kohler or Briggs 35 HP gas engine options

    • (1) pivoting single feed wheel 10 5/8" diameter x 11 1/2" wide

    • Optional dual feed wheels

    • 29" high x 42" wide infeed with folding tray

  • Specifications

    Specifications

    Specifications - Capacity:
    6 in | 15.24 cm
    Specifications - Feed Rate:
    80 ft/min | 24.38 m/min
    Specifications - Fuel Tank:
    7 gal | 26.49 L
    Specifications - Height:
    90 in | 228.60 cm
    Specifications - Hydraulic Tank:
    7 gal | 26.49 L
    Specifications - Length (Open):
    156 in | 386.08 cm
    Specifications - Opening:
    6 in x 12 | 15.24 cm x 30.48 cm
    Specifications - Weight:
    2,000 lbs | 907.19 kg
    Specifications - Width:
    67 in | 170.18 cm

Related Inventory For Sale

Contact

Contact

Consignment

Request a Service

×

Leppo Rents Employee Portal

×

Your session will expire in . If you want to reset this timer, please click OK.

Change Your Preferred Location