90XP
90XP
90XP
90XP
90XP
90XP
90XP
90XP

*Bandit Equipment is available at select Leppo locations.

BANDIT 90XP — TOWABLE DISC STYLE HAND-FED CHIPPER

The Model 90XP is a 9" capacity disc-style chipper and has a distinguished career serving tree care professionals, rental companies and municipalities needing a productive, cost-effective, light-weight chipper. Weighing approximately 4,600 pounds with a gas engine this unit is the perfect solution for those needing a compact and easy to tow machine with the capability to chip material up to 9" in diameter.

A wide of array of engine options are available ranging from 37 to 84 horsepower. If you are looking for a low cost machine, the Kohler 37 horsepower gas engine is a viable solution and if more power is desired gas and diesel engines are offered all the way up to 84 horsepower.

A throat opening of 9 1/2" high x 17" wide along with a 29" high x 45" wide infeed provides ample room to easily feed material up to 9" in diameter. The powerful dual feed wheel system is driven via (2) 15.9 CID hydraulic motors providing approximately 3,376 pounds of pulling power. The optional hydraulic lift cylinder is recommended for additional pulling and compressing power making the unit easier to feed and more productive.

Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.


Features

  • Single 6,000 pound axle with 225/75R 15" tires

  • (2) 7 1/2" diameter x 16 3/8" wide feed wheels with bottom clean out door

  • 37 to 84 horsepower gas and diesel engine options

  • Bandit control panel with reversing auto feed

  • (2) 15.9 CID hydraulic motors

  • 360 degree hand crank discharge chute with end chip deflector (height adjustable)

  • 30" diameter x 1 1/2" thick chipper disc with four knives

  • Optional hydraulic winch

  • Optional hydraulic lift cylinder

  • 29" high x 35" wide infeed with fold down tray

Specifications

Specifications - Capacity:
9 in | 22.86 cm
Specifications - Feed Rate:
90 ft/min | 27.43 m/min
Specifications - Fuel Tank:
24.50 gal | 92.74 L
Specifications - Height:
96 in | 243.84 cm
Specifications - Hydraulic Tank:
7 gal | 26.49 L
Specifications - Length (Open):
196 in | 497.84 cm
Specifications - Opening:
9.5" x 17.5" | 24.13 cm x 43.18 cm
Specifications - Weight:
4,600 lbs | 2,086.53 kg
Specifications - Width:
72 in | 182.88 cm
  • Features

    Features

    • Single 6,000 pound axle with 225/75R 15" tires

    • (2) 7 1/2" diameter x 16 3/8" wide feed wheels with bottom clean out door

    • 37 to 84 horsepower gas and diesel engine options

    • Bandit control panel with reversing auto feed

    • (2) 15.9 CID hydraulic motors

    • 360 degree hand crank discharge chute with end chip deflector (height adjustable)

    • 30" diameter x 1 1/2" thick chipper disc with four knives

    • Optional hydraulic winch

    • Optional hydraulic lift cylinder

    • 29" high x 35" wide infeed with fold down tray

  • Specifications

    Specifications

    Specifications - Capacity:
    9 in | 22.86 cm
    Specifications - Feed Rate:
    90 ft/min | 27.43 m/min
    Specifications - Fuel Tank:
    24.50 gal | 92.74 L
    Specifications - Height:
    96 in | 243.84 cm
    Specifications - Hydraulic Tank:
    7 gal | 26.49 L
    Specifications - Length (Open):
    196 in | 497.84 cm
    Specifications - Opening:
    9.5" x 17.5" | 24.13 cm x 43.18 cm
    Specifications - Weight:
    4,600 lbs | 2,086.53 kg
    Specifications - Width:
    72 in | 182.88 cm

Contact

Contact

Consignment

Request a Service

×

Leppo Rents Employee Portal

×

Your session will expire in . If you want to reset this timer, please click OK.

Change Your Preferred Location


×

Leppo Rents Employee Portal