Mast Climbing Platform 24' Unit
Mast Climbing Platform 24' Unit
Mast Climbing Platform 24' Unit
Mast Climbing Platform 24' Unit
Mast Climbing Platform 24' Unit
Mast Climbing Platform 24' Unit
Mast Climbing Platform 24' Unit
Mast Climbing Platform 24' Unit
The M-Series is the workhorse of Hydro Mobile’s mast climbing work platforms. It is the perfect tool for any facade work that requires high capacity, whether for new construction or restoration. With a load capacity of 20,000 lb, and a climbing rate of 3' per minute, it is perfect for masonry (brick or block), stone or marble facade work from 20' to 250' in height.

The 7' wide decks provide ample room for workers to perform their jobs in comfort. The M-Series structure allows for angled set-ups, and there are a multitude of accessories available that allow this mast climbing work platform to adjust to different architectural configurations and constraints of the work site. All of which contribute to an estimated 30% increase in productivity, due to greater labor efficiency and reduced set-up time, not to mention a safer work environment.

This platform combines power with smaller size to allow work to be undertaken in more confined spaces. Several unit scan be used for added flexibility. And its smaller size makes it highly portable.

Features

  • Two linked units can cover up to 148'

  • Easy and minimal maintenance

  • Three-dimensional, modular configuration

  • Easy and quick installation

  • High on Safety: CE friendly

  • High-Tech: 0 to 210 degree angle configuration

  • Self-contained storage

  • One unit can be extended up to 64'

  • High Speed: 138' length set up in 3 hours

  • High Durability: 15 years minimum life expectancy

Specifications

Climbing speed :
3' (0,9 m) per minute
Drive system :
Hydraulic Ratchet Drive
Engine type :
9 HP gasoline engine • with electrical starter
Free-standing :
35' (10,7 m) with extended telescopic outriggers
Mast section :
16" x 16" x 60" (40,6 cm x 40,6 cm x 1,5 m) • 235 lb (107 kg) per section
Maximum height :
Up to 250' (76,2m) nominal
Maximum load capacity :
22 000 lb at 24' (9979 kg at 7,3m) / 16 600 lb at 64' (7530 kg at 19,5m)
Min./Max. platform length :
24' / 64' (7,3 m / 19,5 m)
Operating system :
3.5 " (8,9cm) hydraulic cylinders @ 2800 psi (19 305 kPa)
Platform dimension (transport) :
W x L x H: 7' x 24' x 4' (2,1m x 7,3m x 1,2 m)
Tie distance :
20' (6,1 m) (30' [9,14 m] if pre-installed)
Total platform weight :
7300 lb (3311 kg)
  • Features

    Features

    • Two linked units can cover up to 148'

    • Easy and minimal maintenance

    • Three-dimensional, modular configuration

    • Easy and quick installation

    • High on Safety: CE friendly

    • High-Tech: 0 to 210 degree angle configuration

    • Self-contained storage

    • One unit can be extended up to 64'

    • High Speed: 138' length set up in 3 hours

    • High Durability: 15 years minimum life expectancy

  • Specifications

    Specifications

    Climbing speed :
    3' (0,9 m) per minute
    Drive system :
    Hydraulic Ratchet Drive
    Engine type :
    9 HP gasoline engine • with electrical starter
    Free-standing :
    35' (10,7 m) with extended telescopic outriggers
    Mast section :
    16" x 16" x 60" (40,6 cm x 40,6 cm x 1,5 m) • 235 lb (107 kg) per section
    Maximum height :
    Up to 250' (76,2m) nominal
    Maximum load capacity :
    22 000 lb at 24' (9979 kg at 7,3m) / 16 600 lb at 64' (7530 kg at 19,5m)
    Min./Max. platform length :
    24' / 64' (7,3 m / 19,5 m)
    Operating system :
    3.5 " (8,9cm) hydraulic cylinders @ 2800 psi (19 305 kPa)
    Platform dimension (transport) :
    W x L x H: 7' x 24' x 4' (2,1m x 7,3m x 1,2 m)
    Tie distance :
    20' (6,1 m) (30' [9,14 m] if pre-installed)
    Total platform weight :
    7300 lb (3311 kg)

Contact

Contact

Consignment

Request a Service

×

Leppo Rents Employee Portal

×

Your session will expire in  seconds. If you want to reset this timer, please click OK.