2650
2650
2650
2650
2650
2650

*Bandit Equipment is available at select Leppo locations.

BANDIT 2650 — RUBBER TIRE STUMP GRINDER

The Model 2650 is a high production stump grinder with the ability to tackle larger diameter stumps with ease. Removable dual drive wheels allow this unit to achieve a width of 35" to fit through backyard gates. With a weight of around 3,820 pounds the 2650 can easily float over softer ground conditions leaving minimal footprint. A Kohler 74 horsepower diesel engine provides high torque for powering through stumps and the unit can be ordered with a swing-out operator's console or radio remote with tether back-up.

Optional Super sweep can be added as an option as well. Bandit’s Super Sweep prevents unseasoned grinders from taking too big of a cut and stalling the engine by automatically backing the cutter wheel away once the engine reaches at pre-set low RPM. When the engine recovers its RPM, the cutter wheel will continue.

Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.


Features

  • Four wheel drive - standard

  • 21" diameter x 1" thick Green Wheel with 18 teeth (option)

  • Optional Super Sweep

  • Cutter wheel is driven via hydraulic motor (no belts or bearings to maintain)

  • 35" or 54" wide grading blade options

  • 21" diameter x 1/2" thick New Revolution wheel with 24 teeth (option)

  • Cutter wheel is engaged via electronic switch

Specifications

SPECIFICATIONS - Cutting Depth:
18.50 in | 46.99 cm
SPECIFICATIONS - Cutting Height:
33 in | 83.82 cm
SPECIFICATIONS - Cutting Swing:
69 in | 175.26 cm
SPECIFICATIONS - Fuel Tank:
17 gal | 64.35 L
SPECIFICATIONS - Height:
72 in | 182.88 cm
SPECIFICATIONS - Hydraulic Tank:
25 gal | 94.64 L
SPECIFICATIONS - Length:
135 in | 342.90 cm
SPECIFICATIONS - Power:
SPECIFICATIONS - Weight:
3,820 lbs
SPECIFICATIONS - Width:
54 in | 140.97 cm
  • Features

    Features

    • Four wheel drive - standard

    • 21" diameter x 1" thick Green Wheel with 18 teeth (option)

    • Optional Super Sweep

    • Cutter wheel is driven via hydraulic motor (no belts or bearings to maintain)

    • 35" or 54" wide grading blade options

    • 21" diameter x 1/2" thick New Revolution wheel with 24 teeth (option)

    • Cutter wheel is engaged via electronic switch

  • Specifications

    Specifications

    SPECIFICATIONS - Cutting Depth:
    18.50 in | 46.99 cm
    SPECIFICATIONS - Cutting Height:
    33 in | 83.82 cm
    SPECIFICATIONS - Cutting Swing:
    69 in | 175.26 cm
    SPECIFICATIONS - Fuel Tank:
    17 gal | 64.35 L
    SPECIFICATIONS - Height:
    72 in | 182.88 cm
    SPECIFICATIONS - Hydraulic Tank:
    25 gal | 94.64 L
    SPECIFICATIONS - Length:
    135 in | 342.90 cm
    SPECIFICATIONS - Power:
    SPECIFICATIONS - Weight:
    3,820 lbs
    SPECIFICATIONS - Width:
    54 in | 140.97 cm

Contact

Contact

Consignment

Request a Service

×

Leppo Rents Employee Portal

×

Your session will expire in . If you want to reset this timer, please click OK.

Change Your Preferred Location


×

Leppo Rents Employee Portal