Features

• Rear axle stabilization system locks the rear axle to the frame if the parking brake is engaged, if the boom is raised 60 degrees or higher, or if the PWP System is activated.

• Three steering modes – 4-wheel, 2-wheel and crab – enhance maneuverability and are easily changed by the flip of a switch.

• Industry loading job site maneuverability with a 12' 2" turning radius.

• ROPS and FOPS certified operator's compartment.

• Two-wheel, four-wheel, crab steering standard.

• Standard lockable storage compartment for service items, such as work gloves, tools, blueprints and more.

• Choice of Dual-Function or Tri-Function pilot-operated joysticks that allow operators precise movement of heavy loads

• Transmission and hydraulics easily accessed through large hinged panel.

• Easy access to hydraulic oil and transmission reservoirs.

• Exterior boom hose routings for easy access.

• Rifled bushings in key areas

• Powershift transmission with four forward and two reverse gears, with a 2-year/2,000-hour warranty.

• Un-matched panoramic visibility increases work-site safety and operator productivity and reduces operator fatigue.

• Personnel Work Platform System allows the use of ANSI/ITSDF B56.6-compliant personnel work platforms for safety and efficiency.

• Choice of canopy or cab with heating and defrosting  systems standard (air-conditioning optional).

• 10-degree frame tilt in both directions.

• Engine shutdown protection feature allows 30-seconds of run time for moving the unit to a safe location for loading or repair.

• Double universal joints for tight turn radius without applyingstress on the axle.

• Standard centrifugal pre-cleaner and two-stage air cleaner.

• Lockable, two-piece cab door for security, communication and cross-ventilation.

• Remote Boom Control can raise/lower and extend/retract the boom, as well as start/stop the engine from the work platform or outside the cab.

• Standard pneumatic tires.

• Hydraulic main control valve in back door.