CARY-LIFT 254i
CARY-LIFT 254i
CARY-LIFT 254i
CARY-LIFT 254i
CARY-LIFT 254i
CARY-LIFT 254i
The Cary-Lift 254i provides exceptional power and maneuverability to move loads more effectively than articulated loaders, both in pipeyards and on rough terrain jobsites.

Features

  • The 254i is capable of reaching the forks out an extra 4 feet without having to reposition the machine. It offers a maximum lift height of 14 feet.

  • Hydraulic frame sway control and side shift stabilize loads by leveling the lifting frame when driving on uneven ground. The sway cylinder moves 7 degrees both right and left of center.

  • The unique overhead lift arm design gives the operator full front visibility when lifting, placing or transporting loads. The arms are mounted behind the cab, rather than in front where they would obstruct the forward view.

  • Dual joysticks provides intuitive control of the hydraulics for lifting, tilting and reaching simultaneously.

  • Excellent maneuverability thanks to 4-wheel drive with 2-wheel, 4-wheel and crab hydraulic power steering modes.

  • 70-gallon (265 L) fuel tank capacity allows for longer operating intervals.

  • A sliding door offers quick access to the comfortable cab, which includes a tilt/telescoping steering column and swiveling, adjustable suspension seat with padded armrests and lumbar support. A rear-view camera with 7-inch display is standard.

  • Unlike other forward-reaching, articulated loaders, the 254i has a heavy-duty, solid steel frame design that allows it to take full loads into sharp turns without sacrificing load capacity or stability.

  • Cary-Lift forks are capable of tilting down 90 degrees for specialized lifting tasks.

  • Wheel base of just 12 feet provides a tight turning radius of 23 feet, 6 inches.

  • Large tinted safety glass windows contribute to better visibility.

  • The 254i is powered by a 225-HP Cummins QSB6.7 Tier 4 Final diesel engine with DOC and SCR aftertreatment. The unit includes an engine-driven fan, cooling package and engine block heater as standard equipment.

Specifications

Axles:
AxleTech planetary front & rear; 4-wheel drive
Below Grade Reach :
7.5" (19.1 cm)
Cooling Package :
CAC, radiator and transmission
DEF Tank :
5 gal. (19 L)
Fan :
Engine driven
Filter :
Hydraulic return oil filtration (10 micron)
Fork Length :
60" (152 cm) standard, others available
Fuel Tank :
70 gal. (265 L)
Ground Clearance :
17" (43 cm)
Heating :
Engine block heater
Lighting :
2 headlights, 2 stop/taillights, 2 reverse lights
Max Load Capacity (Extended) :
15,000 lbs (6,804 kg) 24" LC from back of fork 20,000 lbs (9,072 kg) tipping load
Max Load Capacity (Retracted) :
25,000 lbs (11,340 kg) 24" LC from back of fork 50,000 lbs (22,680 kg) tipping load
Maximum Lift Height :
16' (488 cm)
Maximum Reach from Tires :
3' 6" (107 cm) retracted 9' 1" (277 cm) extended, forks parallel 8’ 10" from ground 8' 2" (249 cm) extended, forks parallel at carrying height
Maximum Travel Speed :
2.8 mph (4.5 km/h) 1st gear 5.9 mph (9.5 km/h) 2nd gear 10.3 mph (16.6 km/h) 3rd gear 17.7 mph (28.5 km/h) 4th gear
Model/Power :
225 HP (168 kW) Cummins QSB6.7 Tier 4 Final with DOC and SCR aftertreatment
Overall Height :
12' 7" (384 cm) - carrying position, 19' 4" (589 cm) - max raised position
Overall Length :
26' 5" (805 cm) - carrying position, 32' (975 cm) - at max reach
Overall Width :
10' 6" (320 cm)
Parking Brake :
Spring applied hydraulic release
Service Brakes :
4-wheel outboard dry hydraulic disc
Steering:
Hydraulic power steering with 2 wheel, 4 wheel and crab steering
Sway Cylinder :
7° both right and left of center
System :
Load-sensing hydraulic
Tank :
75 gal. (284 L)
Tires :
18.00 x 25, 32 ply interchangeable
Total Operating Weight :
53,500 lbs (24,267 kg)
Transmission :
Dana R32000, 4-speed Powershift Dana C323 torque converter
Turning Radius :
23' 6" (716 cm) 4-wheel steer
Wheel Base :
12' (366 cm)

Air Conditioning

Keep the cab cool in warmer conditions.

Lift Heights

Machine can be configured to provide additional lift heights.

Tires

Multiple tire sizes and types available to fit the application.

Attachments

In addition to standard fork frames, the 254i can be equipped with a pipe and pole baler, log baler, scrap baler or tire handler.

Light Packages

Available to provide added illumination to the jobsite.

  • Features

    Features

    • The 254i is capable of reaching the forks out an extra 4 feet without having to reposition the machine. It offers a maximum lift height of 14 feet.

    • Hydraulic frame sway control and side shift stabilize loads by leveling the lifting frame when driving on uneven ground. The sway cylinder moves 7 degrees both right and left of center.

    • The unique overhead lift arm design gives the operator full front visibility when lifting, placing or transporting loads. The arms are mounted behind the cab, rather than in front where they would obstruct the forward view.

    • Dual joysticks provides intuitive control of the hydraulics for lifting, tilting and reaching simultaneously.

    • Excellent maneuverability thanks to 4-wheel drive with 2-wheel, 4-wheel and crab hydraulic power steering modes.

    • 70-gallon (265 L) fuel tank capacity allows for longer operating intervals.

    • A sliding door offers quick access to the comfortable cab, which includes a tilt/telescoping steering column and swiveling, adjustable suspension seat with padded armrests and lumbar support. A rear-view camera with 7-inch display is standard.

    • Unlike other forward-reaching, articulated loaders, the 254i has a heavy-duty, solid steel frame design that allows it to take full loads into sharp turns without sacrificing load capacity or stability.

    • Cary-Lift forks are capable of tilting down 90 degrees for specialized lifting tasks.

    • Wheel base of just 12 feet provides a tight turning radius of 23 feet, 6 inches.

    • Large tinted safety glass windows contribute to better visibility.

    • The 254i is powered by a 225-HP Cummins QSB6.7 Tier 4 Final diesel engine with DOC and SCR aftertreatment. The unit includes an engine-driven fan, cooling package and engine block heater as standard equipment.

  • Specifications

    Specifications

    Axles:
    AxleTech planetary front & rear; 4-wheel drive
    Below Grade Reach :
    7.5" (19.1 cm)
    Cooling Package :
    CAC, radiator and transmission
    DEF Tank :
    5 gal. (19 L)
    Fan :
    Engine driven
    Filter :
    Hydraulic return oil filtration (10 micron)
    Fork Length :
    60" (152 cm) standard, others available
    Fuel Tank :
    70 gal. (265 L)
    Ground Clearance :
    17" (43 cm)
    Heating :
    Engine block heater
    Lighting :
    2 headlights, 2 stop/taillights, 2 reverse lights
    Max Load Capacity (Extended) :
    15,000 lbs (6,804 kg) 24" LC from back of fork 20,000 lbs (9,072 kg) tipping load
    Max Load Capacity (Retracted) :
    25,000 lbs (11,340 kg) 24" LC from back of fork 50,000 lbs (22,680 kg) tipping load
    Maximum Lift Height :
    16' (488 cm)
    Maximum Reach from Tires :
    3' 6" (107 cm) retracted 9' 1" (277 cm) extended, forks parallel 8’ 10" from ground 8' 2" (249 cm) extended, forks parallel at carrying height
    Maximum Travel Speed :
    2.8 mph (4.5 km/h) 1st gear 5.9 mph (9.5 km/h) 2nd gear 10.3 mph (16.6 km/h) 3rd gear 17.7 mph (28.5 km/h) 4th gear
    Model/Power :
    225 HP (168 kW) Cummins QSB6.7 Tier 4 Final with DOC and SCR aftertreatment
    Overall Height :
    12' 7" (384 cm) - carrying position, 19' 4" (589 cm) - max raised position
    Overall Length :
    26' 5" (805 cm) - carrying position, 32' (975 cm) - at max reach
    Overall Width :
    10' 6" (320 cm)
    Parking Brake :
    Spring applied hydraulic release
    Service Brakes :
    4-wheel outboard dry hydraulic disc
    Steering:
    Hydraulic power steering with 2 wheel, 4 wheel and crab steering
    Sway Cylinder :
    7° both right and left of center
    System :
    Load-sensing hydraulic
    Tank :
    75 gal. (284 L)
    Tires :
    18.00 x 25, 32 ply interchangeable
    Total Operating Weight :
    53,500 lbs (24,267 kg)
    Transmission :
    Dana R32000, 4-speed Powershift Dana C323 torque converter
    Turning Radius :
    23' 6" (716 cm) 4-wheel steer
    Wheel Base :
    12' (366 cm)
  • Details

    Air Conditioning

    Keep the cab cool in warmer conditions.

    Lift Heights

    Machine can be configured to provide additional lift heights.

    Tires

    Multiple tire sizes and types available to fit the application.

    Attachments

    In addition to standard fork frames, the 254i can be equipped with a pipe and pole baler, log baler, scrap baler or tire handler.

    Light Packages

    Available to provide added illumination to the jobsite.

Contact

Contact

Consignment

Request a Service

×

Leppo Rents Employee Portal

×

Your session will expire in  seconds. If you want to reset this timer, please click OK.