CARY-LIFT 204i
Designed to provide full front visibility, the Cary-Lift 204i allows operators to move loads with maximum efficiency and safety. Offering joystick controls for intuitive operation, the machine also provides forward reach and sway control for unmatched load manipulation.

Features

  • Unlike other forward-reaching, articulated loaders, the 204i has a heavy-duty, solid steel frame design that allows it to take full loads into sharp turns without sacrificing load capacity or stability.

  • IQAN electrohydraulic control system offers infinite variable control, individual operator settings and onboard diagnostics for consistent, productive operation.

  • A sliding door offers quick access to the comfortable, air-conditioned cab, which includes a tilt/telescoping steering column and swiveling, adjustable suspension seat with padded armrests and lumbar support.

  • The unique overhead lift arm design gives the operator full front visibility when lifting, placing or transporting loads. The arms are mounted behind the cab, rather than in front where they would obstruct the forward view.

  • The 204i is powered by a 200-HP Cummins QSB6.7 Tier 4 Final diesel engine with DOC and SCR aftertreatment. The unit includes an engine-driven fan cooling package and engine block heater as standard equipment.

  • Dual joysticks provides intuitive control of the hydraulics for lifting, tilting and reaching simultaneously.

  • Routine maintenance is simplified by a centralized lubrication system that provides one access point for most greasing needs.

  • 70-gallon (265 L) fuel tank capacity allows for longer operating intervals.

  • Standard rear-view camera and large tinted safety glass windows contribute to better visibility.

  • Wheel base of just 12 feet provides a tight turning radius of 21 feet, 6 inches.

  • Excellent maneuverability thanks to 4-wheel drive with 2-wheel, 4-wheel and crab hydraulic power steering modes.

  • Cary-Lift forks are capable of tilting down 90 degrees for specialized lifting tasks.

  • The 204i is capable of reaching the forks out an extra 4 feet without having to reposition the machine. It offers a maximum lift height of 14 feet.

  • Hydraulic frame sway control and side shift stabilize loads by leveling the lifting frame when driving on uneven ground. The sway cylinder moves 7 degrees both right and left of center.

Specifications

Axles:
AxleTech planetary front & rear; 4-wheel drive
Below Grade Reach :
2.5" (6.35 cm)
Cooling Package :
CAC, radiator and transmission
DEF Tank :
5 gal. (19 L)
Fan:
Engine driven
Filter :
Hydraulic return oil filtration (10 micron)
Fork Length :
60" (152 cm) standard, others available
Fuel Tank :
70 gal. (265 L)
Ground Clearance :
21.5" (55 cm)
Heating:
Engine block heater
Lighting:
2 headlights, 2 stop/taillights, 2 rear work/reverse lights
Max Load Capacity (Extended) :
12,000 lbs (5,443 kg) 24" LC from back of fork,16,000 lbs (7,258 kg) tipping load forward
Max Load Capacity (Retracted) :
20,000 lbs (9,072 kg) 24" LC from back of fork, 40,000 lbs (18,144 kg) tipping load forward
Maximum Lift Height :
16' (488 cm)
Maximum Reach from Tires :
3' 1.5" (95 cm) retracted, 8' 3.8" (253 cm) extended, forks parallel 8’ 10" from ground, 7' 6.3" (229 cm) extended, forks parallel at carrying height
Maximum Travel Speed :
2.5 mph (4.0 km/h) 1st gear 4.8 mph (7.7 km/h) 2nd gear 9.6 mph (15.5 km/h) 3rd gear 19.1 mph (30.7 km/h) 4th gear
Model/Power :
200 HP (149 kW) Cummins QSB6.7 Tier 4 Final with DOC and SCR aftertreatment
Overall Height :
12' 6" (381 cm) - carrying position, 19' 6" (594 cm) - max raised position
Overall Length :
25' 5.3" (775 cm) - carrying position, 30' 1.5" (918 cm) - at max reach
Overall Width :
10' 6" (320 cm)
Parking Brake :
Spring applied hydraulic release
Service Brakes :
4-wheel outboard dry hydraulic disc
Steering:
Hydraulic power steering with 2 wheel, 4 wheel and crab steering
Sway Cylinder :
7° both right and left of center
System :
Load-sensing hydraulic, piston
Tank:
75 gal. (284 L)
Tires:
23.5 x 25, 24 ply interchangeable
Total Operating Weight :
45,200 lbs (20,502 kg)
Transmission :
Funk DF 150, 4-speed Powershift Funk DF 3R2A torque converter
Turning Radius :
21' 6" (655 cm) 4-wheel steer
Wheel Base :
12' (366 cm)

Autoshift

An autoshift transmission is available.

Lift Heights

Machine can be configured to provide additional lift heights.

Attachment Options

In addition to standard fork frames, the 204i can be equipped with a pipe and pole baler, rotating pipe and pole handler, log baler, scrap baler, tire handler or clam.

Tires

Multiple tire sizes and types available to fit the application.

Light Packages

Available to provide added illumination to the jobsite.

  • Features

    Features

    • Unlike other forward-reaching, articulated loaders, the 204i has a heavy-duty, solid steel frame design that allows it to take full loads into sharp turns without sacrificing load capacity or stability.

    • IQAN electrohydraulic control system offers infinite variable control, individual operator settings and onboard diagnostics for consistent, productive operation.

    • A sliding door offers quick access to the comfortable, air-conditioned cab, which includes a tilt/telescoping steering column and swiveling, adjustable suspension seat with padded armrests and lumbar support.

    • The unique overhead lift arm design gives the operator full front visibility when lifting, placing or transporting loads. The arms are mounted behind the cab, rather than in front where they would obstruct the forward view.

    • The 204i is powered by a 200-HP Cummins QSB6.7 Tier 4 Final diesel engine with DOC and SCR aftertreatment. The unit includes an engine-driven fan cooling package and engine block heater as standard equipment.

    • Dual joysticks provides intuitive control of the hydraulics for lifting, tilting and reaching simultaneously.

    • Routine maintenance is simplified by a centralized lubrication system that provides one access point for most greasing needs.

    • 70-gallon (265 L) fuel tank capacity allows for longer operating intervals.

    • Standard rear-view camera and large tinted safety glass windows contribute to better visibility.

    • Wheel base of just 12 feet provides a tight turning radius of 21 feet, 6 inches.

    • Excellent maneuverability thanks to 4-wheel drive with 2-wheel, 4-wheel and crab hydraulic power steering modes.

    • Cary-Lift forks are capable of tilting down 90 degrees for specialized lifting tasks.

    • The 204i is capable of reaching the forks out an extra 4 feet without having to reposition the machine. It offers a maximum lift height of 14 feet.

    • Hydraulic frame sway control and side shift stabilize loads by leveling the lifting frame when driving on uneven ground. The sway cylinder moves 7 degrees both right and left of center.

  • Specifications

    Specifications

    Axles:
    AxleTech planetary front & rear; 4-wheel drive
    Below Grade Reach :
    2.5" (6.35 cm)
    Cooling Package :
    CAC, radiator and transmission
    DEF Tank :
    5 gal. (19 L)
    Fan:
    Engine driven
    Filter :
    Hydraulic return oil filtration (10 micron)
    Fork Length :
    60" (152 cm) standard, others available
    Fuel Tank :
    70 gal. (265 L)
    Ground Clearance :
    21.5" (55 cm)
    Heating:
    Engine block heater
    Lighting:
    2 headlights, 2 stop/taillights, 2 rear work/reverse lights
    Max Load Capacity (Extended) :
    12,000 lbs (5,443 kg) 24" LC from back of fork,16,000 lbs (7,258 kg) tipping load forward
    Max Load Capacity (Retracted) :
    20,000 lbs (9,072 kg) 24" LC from back of fork, 40,000 lbs (18,144 kg) tipping load forward
    Maximum Lift Height :
    16' (488 cm)
    Maximum Reach from Tires :
    3' 1.5" (95 cm) retracted, 8' 3.8" (253 cm) extended, forks parallel 8’ 10" from ground, 7' 6.3" (229 cm) extended, forks parallel at carrying height
    Maximum Travel Speed :
    2.5 mph (4.0 km/h) 1st gear 4.8 mph (7.7 km/h) 2nd gear 9.6 mph (15.5 km/h) 3rd gear 19.1 mph (30.7 km/h) 4th gear
    Model/Power :
    200 HP (149 kW) Cummins QSB6.7 Tier 4 Final with DOC and SCR aftertreatment
    Overall Height :
    12' 6" (381 cm) - carrying position, 19' 6" (594 cm) - max raised position
    Overall Length :
    25' 5.3" (775 cm) - carrying position, 30' 1.5" (918 cm) - at max reach
    Overall Width :
    10' 6" (320 cm)
    Parking Brake :
    Spring applied hydraulic release
    Service Brakes :
    4-wheel outboard dry hydraulic disc
    Steering:
    Hydraulic power steering with 2 wheel, 4 wheel and crab steering
    Sway Cylinder :
    7° both right and left of center
    System :
    Load-sensing hydraulic, piston
    Tank:
    75 gal. (284 L)
    Tires:
    23.5 x 25, 24 ply interchangeable
    Total Operating Weight :
    45,200 lbs (20,502 kg)
    Transmission :
    Funk DF 150, 4-speed Powershift Funk DF 3R2A torque converter
    Turning Radius :
    21' 6" (655 cm) 4-wheel steer
    Wheel Base :
    12' (366 cm)
  • Details

    Autoshift

    An autoshift transmission is available.

    Lift Heights

    Machine can be configured to provide additional lift heights.

    Attachment Options

    In addition to standard fork frames, the 204i can be equipped with a pipe and pole baler, rotating pipe and pole handler, log baler, scrap baler, tire handler or clam.

    Tires

    Multiple tire sizes and types available to fit the application.

    Light Packages

    Available to provide added illumination to the jobsite.

Contact

Contact

Consignment

Request a Service