AS1932
AS1932
AS1932
AS1932
AS1932
AS1932
Featuring a smooth deck extension, universal drive controller and simple serviceability, the electric AS1932E and hydraulic AS1932 provide exceptional safety and reliability for indoor and outdoor scissor lift needs.

Specifications

Drive Speed :
Lowered: 2.2 ± 0.12 mph (3.5 ± 0.19 km/h) Elevated: 0.5 ± 0.06 mph (0.8 ± 0.1 km/h)
Gradeability :
25%
Inside Turning Radius :
7" (18 cm)
Lift Time :
16 ± 2 seconds
Lower Time :
28 ± 2 seconds
Machine Weight :
3,527 lbs (1,600 kg)
Maximum Ground Pressure :
149.2 psi
Maximum Slope :
1.5° / 3°
On-Deck Extension Capacity :
265 lbs (120 kg)
Outside Turning Radius :
5.6' (171 cm)
Overall Height :
6' (183 cm) - rails down 7' (213 cm) - rails up
Overall Length :
6' (183 cm)
Overall Width :
2.7' (82 cm)
Platform Capacity :
510 lbs (231 kg)
Platform Extension :
3' (91 cm)
Platform Occupants :
2 - indoor 1 - outdoor
Standards Compliance :
ANSI A92.20 CSA-B354.6
Work Height :
25.6' (780 cm)

Drive & Tires

  • 4x2 drive
  • Extra wide, non-marking tires
  • Improved steering mechanism reduces tire wear when turning
  • Pothole guards
  • Two-wheel brake
  • Manual brake release
  • Better brakeability on long downhills

Diagnostics & Sensors

  • Intelligent diagnostic system
  • Tilt sensor and tilt alarm
  • Slope sensor
  • Motion alarm
  • Flashing beacon/buzzer (both sides)
  • Emergency descent
  • Descent alarm and protection
  • Overload alarm
  • Hour meter
  • Horn

Universal Controller

  • Universal drive control box with motion alarm and LED screen
  • Proportional control
  • Quick disconnect for control box
  • Emergency stop device

Battery & Service

  • Advanced battery charger with voltage protection
  • Slide-out component tray offers easy access to Trojan deep-cycle batteries and hydraulic pump
  • Battery charging status indicator
  • Charging operation limit

Warranty

  • 1 year: Full machine and attachment
  • 2 years or 2,000 hours: Electric & hydraulic drive motors, lift cylinders, hydraulic valves, hydraulic pumps
  • 5 years: Frame weldment, scissor stacks, platform weldment

Reinforced Working Platform

  • AC power to platform; 120VAC (GFCI) platform power
  • 3-foot platform extension with smooth foot pedal control
  • Fold-in guard rails
  • Self-closing, self-catching entry gate
  • Lanyard anchor point

Scissor Stacks

  • Large scissor arms for increased stability and durability
  • Pressure transducer (overload protector)
  • Full-height drive

Hydraulic

  • Optimized electronic control system
  • Battery powered with zero emissions
  • Optimization of hydraulic system delivers longer lasting performance
  • Features

    Features

  • Specifications

    Specifications

    Drive Speed :
    Lowered: 2.2 ± 0.12 mph (3.5 ± 0.19 km/h) Elevated: 0.5 ± 0.06 mph (0.8 ± 0.1 km/h)
    Gradeability :
    25%
    Inside Turning Radius :
    7" (18 cm)
    Lift Time :
    16 ± 2 seconds
    Lower Time :
    28 ± 2 seconds
    Machine Weight :
    3,527 lbs (1,600 kg)
    Maximum Ground Pressure :
    149.2 psi
    Maximum Slope :
    1.5° / 3°
    On-Deck Extension Capacity :
    265 lbs (120 kg)
    Outside Turning Radius :
    5.6' (171 cm)
    Overall Height :
    6' (183 cm) - rails down 7' (213 cm) - rails up
    Overall Length :
    6' (183 cm)
    Overall Width :
    2.7' (82 cm)
    Platform Capacity :
    510 lbs (231 kg)
    Platform Extension :
    3' (91 cm)
    Platform Occupants :
    2 - indoor 1 - outdoor
    Standards Compliance :
    ANSI A92.20 CSA-B354.6
    Work Height :
    25.6' (780 cm)
  • Details

    Drive & Tires

    • 4x2 drive
    • Extra wide, non-marking tires
    • Improved steering mechanism reduces tire wear when turning
    • Pothole guards
    • Two-wheel brake
    • Manual brake release
    • Better brakeability on long downhills

    Diagnostics & Sensors

    • Intelligent diagnostic system
    • Tilt sensor and tilt alarm
    • Slope sensor
    • Motion alarm
    • Flashing beacon/buzzer (both sides)
    • Emergency descent
    • Descent alarm and protection
    • Overload alarm
    • Hour meter
    • Horn

    Universal Controller

    • Universal drive control box with motion alarm and LED screen
    • Proportional control
    • Quick disconnect for control box
    • Emergency stop device

    Battery & Service

    • Advanced battery charger with voltage protection
    • Slide-out component tray offers easy access to Trojan deep-cycle batteries and hydraulic pump
    • Battery charging status indicator
    • Charging operation limit

    Warranty

    • 1 year: Full machine and attachment
    • 2 years or 2,000 hours: Electric & hydraulic drive motors, lift cylinders, hydraulic valves, hydraulic pumps
    • 5 years: Frame weldment, scissor stacks, platform weldment

    Reinforced Working Platform

    • AC power to platform; 120VAC (GFCI) platform power
    • 3-foot platform extension with smooth foot pedal control
    • Fold-in guard rails
    • Self-closing, self-catching entry gate
    • Lanyard anchor point

    Scissor Stacks

    • Large scissor arms for increased stability and durability
    • Pressure transducer (overload protector)
    • Full-height drive

    Hydraulic

    • Optimized electronic control system
    • Battery powered with zero emissions
    • Optimization of hydraulic system delivers longer lasting performance

Other Boom Lifts Models

Contact

Contact

Consignment

Request a Service